Save 20% by purchasing the full collection(s)

You will recieve 3 sizes of each species as follows (total of 21 cutters) if you buy the entire collection, or one of each species (7 cutters) if you purchase the small, medium or large sets. The three sizes of each species are also available in other listings.

IMPORTANT PLEASE READ: Please note that a small and medium vaiation of each species was added on the 31/01/2025. If you purchased the original collection before this date that was size "large" so you would need to buy the small and medium collections to make a full set.

Approximate sizes of finished item:

Luna Moth Large - 50mm wide x 40mm high

Luna Moth Medium -37.5mm wide x 30mm high

Luna Moth Small - 26.5mm wide x 20mm high

Elephant Hawk Moth Large - 45mm wide x 28mm high

Elephant Hawk Moth Medium - 34.5mm wide x 22mm high

Elephant Hawk Moth Small - 22.5mm wide x 1mm high

Swallowtail Large - 45mm wide x 30mm high

Swallowtail Medium - 37mm wide x 23.5mm high

Swallowtail Small - 25mm wide x 15mm high

Peacock Large - 42mm wide x 32mm high

Peacock Medium - 32mm wide x 24mm high

Peacock Small - 22mm wide x 15mm high

Monarch Large - 38mm wide x 28mm high

Monarch Medium - 30mm wide x 22mm high

Monarch Small - 20mm wide x 15mm high

Red Admiral Large - 40mm wide x 20mm high

Red Admiral Medium - 31mm wide x 15mm high

Red Admiral Small - 21mm wide x 10mm high

Blue Morpho Large - 40mm wide x 18mm high

Blue Morpho Medium - 32mm wide x 14mm high

Blue Morpho Small - 22mm wide x 10mm high

*Features*

Super sharp 0.4mm cutting blade.
Strong wall for extra support - designed for prolonged use.
Sturdy base with rounded edges for comfort when in use.
Please contact me if you require a different size and I can make a custom file up for you.
For use with clay up to 2mm thick (largest setting on most pasta machines) although it works best with thin clay.
Made from PLA - a plant based, biodegradable material.

Most items are printed and ready to go although when demand is high there may be an additional 1-2 days processing time.

*Care*

Clean with isopropyl alcohol or baby wipes.
Do not expose to heat or sun.
Do not expose to harsh chemicals that can melt the PLA
Do not use in the dishwasher.

Pictures show my own work using Fimo Soft Clay, baked and then hand painted with acrylic paint.

Please note that 3D printed cutters can occasionally have tiny imperfections and tiny whisps where the nozzle moves around the print and where the "seams" are. This is normal and to be expected of 3D printed cutters

My cutters are fully designed, printed and tested by myself to ensure the best quality possible.

Please follow my social media @sunshinecutters for updates and new product releases.

Thank you for supporting my small business.

Helena x

Moths & Butterflies - Full Collection(s)

£16.95

Quantity

Items are usually in stock and ready to ship within 1-2 days but please allow 3-4 days if we are experiencing a high demand for these items.

We aim to ship using first class post for total order values less than £10.00 and Tracked 48 for any value higher than £10.00. The tracking number will be provided upon dispatch if your parcel has been sent using a tracked service.

International orders are welcomed although these will always be sent using a tracked service regardless of the value. Please be patient for your items to arrive as they can often take a couple of week or longer to get through customs.

Please respect that we aim to use as few non recyclable materials as possible so your items will usually come shipped loose in a box or padded bag.

If you are not 100% satisfied with your physical items you are more than welcome to return them provided they have not been used and are in the original condition they were sent in. The Customer is responsble for any return costs. Digital items are strictly non refundable.

If you have any problems at all please contact us and we will find a solution right away.
Please clean your cutters using isopropyl alcohol, baby wipes or tepid (not warm or hot) soapy water.

Do not use any harsh chemicals such as acetone as this will melt the cutter.

Be sure not to be rough with your cutters - they have a very sharp thin cutting blade that do not require any force to cut through the clay.

Avoid excess sideways pressure on your cutters that will cause them to flex as this could damage the cutting blade and shorten the "life" of your cutter.
1) Make sure your clay is fully conditioned before use - there are many You-tube videos describing this if you are new to using polymer clay.

2) If possible use a pasta machine to roll out your clay to the desired thickness. You can also use an acrylic roller. Check the thickness is correct as it varies with each cutter, especially the ones with embossed features. These will not work correctly if the clay is too thin or thick.

3) Apply your clay to a ceramic tile or smooth glass surface. Prepare a small dish or ramekin with a small sponge inside dampened with water and a drop of liquid hand soap. This doesn't want to be swimming in water - just enough to moisten the cutter.

4) Splodge the cutting blade side down onto your damp sponge a couple of times and then press the cutter into the clay. This does not require much force so just be gentle - you should feel when it has cut through (you can also use cornflower dusted onto the clay for this step if you prefer).

5) Use a tissue blade to release the clay from the tile and gently run your finger over any ragged edges before baking. This saves loads of sanding time in the long run!

6) Bake your clay and finish your items as normal.

Please note ~ we can no longer ship to NI or the EU due to new GPSR laws. We apologize for any inconvenience caused.

FREE SHIPPING WHEN YOU SPEND OVER £20.00! (UK only)

🌻3D Printed Polymer Clay Cutters Designed and Manufactured by a Small Business in the UK🌻

Moths & Butterflies - Full Collection(s)

Shipping Information

Cutter Cleaning & Care

Using your Cutters

Pricing