My own range of cutters specifically designed for use with polymer clay.

THESE ARE SPECIFICALLY DESIGNED FOR CLAY SLAB DESIGNS & WORK BEST WITH A CLAY THICKNESS OF 1.4mm (setting 4 on most domestic pasta machines)
 
Watch my tutorial video here: https://www.youtube.com/watch?v=JbZyY70ePyI&t=14s if you need any help. 
 
The embossing features are slightly deeper than usual cutters to accommodate for thinner clay. If you use thicker clay the details will be much deeper making them unsuitable for stud earrings. 
 
Approximate size of finished Items:
 
Ammonite: 7mm round
Angelfish: 10x10mm
Clam Shell: 8.5mm wide x 7.5mm tall
Sea Horse: 5mm wide x 11.5mm tall
Shark: 21mm wide by 6mm tall
Shell: 4mm wide x 10.5mm tall
Starfish: 9mm diameter
Stingray: 11mm wide x 7mm tall - He will require a simple tail making to make him realistic.
Turtle: 9.5mm wide x 11mm tall
 
*Features*
Set of 9 tiny clay cutters. 
Super sharp 0.4mm cutting blade.
Strong wall with extra cutting blade support design for prolonged use.
Sturdy base with rounded edges for comfort when in use.
For use with clay 1.4-1.8mm thick (setting 3 or 4 on most pasta machines) 
Made from PLA - a plant based, biodegradable material. 
All items printed and ready to go with fast shipping! 
Please contact me if you require a different size and I can make a custom file up for you. 
 
* How to use*
Slab cutters can be a little tricky to use so follow these steps for best results:
1) Roll clay out 1.4-1.8mm thick (setting 3-4 on most pasta machines)
2) Dip cutting side of cutter into a damp soapy sponge a couple of times. You can also dust the clay with cornflour too to help stop the clay from sticking.
3) Press cutter into clay lightly and wiggle a little as you go. You can also use the "double cut" method where you press the cutter in a little way, pull it off, then cut again over the top. 
4) Apply your cut shapes to the slab as usual. 
 
Please see my instagram @sunshinecutters for many videos of my methods. 
 
*Care*
Clean with isopropyl alcohol or baby wipes.
Do not expose to heat or sun. 
Do not expose to harsh chemicals that can melt the PLA
Do not use in the dishwasher. 
Pictures show my own work using Fimo Soft Clay.
Please note that 3D printed cutters can occasionally have tiny imperfections where the nozzle lifts away from the cutter on its final layer and where the "seams" are. This is normal and to be expected of 3D printed cutters
 
My cutters are fully designed, printed and tested by myself to ensure the best quality possible. 
Please follow my social media @sunshinecutters for updates and new product releases. 
 
Thank you for supporting my small business. 
Helena xx